Agilent (Velocity 11) Pin Tool Floating Frame Fixtures

 
 
These Agilent (Velocity 11) Floating Frame Fixtures consist of a top float plate that will accommodate all 1.58 mm diameter tubes, a bottom float plate that will accommodate either a .229 mm, .457 mm or .787 mm diameter pin and 8 standoffs that keep the two plates separate.  The length of the standoff is determined by the length of the pin used.  For Agilent (Velocity 11) pin tools we recommend the shorter FP_C series pins.

Simply select the Floating Frame Fixture and the Pin and you are ready to order.  If you have more specific needs call us for help at (800) 455-0644.

Click here for a list of published articles that cite using the products on this page.

 
 


  Floating Frame Fixtures for 96 pins

     
 

 

AFIXV96FP9
For 0.229 diameter FP9, FP9CB, FP9T, solid, slot or hydrophobic pins

AFIXV96FP8
For 0.356 diameter FP8, FP8CB, FP8T, solid, slot or hydrophobic pins
 

AFIXV96FP1
For 0.457 diameter FP1, FP1CB, FP1T, solid, slot or hydrophobic pins
 

AFIXV96FP3
For 0.787 diameter FP3, FP3CB, FP3T, solid, slot or hydrophobic pins
 

AFIXV96FP4
For 0.914 diameter FP4, FP4CB, FP4T, solid, slot or hydrophobic pins

 
 


  Floating Frame Fixtures for 384 pins

     
 


AFIXV384FP9
For 0.229 diameter FP9, FP9CB, FP9T, solid, slot or hydrophobic pins

AFIXV384FP8
For 0.356 diameter FP8, FP8CB, FP8T,solid, slot or hydrophobic pins

AFIXV384FP1
For 0.457 diameter  FP1, FP1CB, FP1T, solid, slot or hydrophobic pins

AFIXV384FP3
For 0.787 diameter  FP3, FP3CB, FP3T, solid, slot or hydrophobic pins

AFIXV384FP4
For 0.914 diameter FP4, FP4CB, FP4T, solid, slot or hydrophobic pins

 
 


  Floating Frame Fixtures for 1536 pins

     
 


AFIXV1536FP9
For 0.229 diameter FP9, FP9CB, FP9T, solid, slot or hydrophobic pins

AFIXV1536FP8
For 0.356 diameter FP8, FP8CB, FP8T, solid, slot or hydrophobic pins

 

AFIXV1536FP1
For 0.457 diameter  FP1, FP1CB, FP1T, solid, slot or hydrophobic pins

 

AFIXV1536FP3
For 0.787 diameter  FP3, FP3CB, FP3T, solid, slot or hydrophobic pins 

 
 


  E-Clip Type Double Plate Floating Frame Fixtures

     
 


The Robot E-Clip Type Fixtures consist of a top float plate that will  accommodate a 1.58 mm diameter FP or FP6 series E-Clip pin and a bottom float plate that will also accommodate the same pins.  It also has eight 3.175 mm standoffs that keep the two plates separate.  The larger diameter pins permit larger volumes of liquid to be transported. 

 
 


  E-Clip Style Floating Frame Fixtures

     
 


AFIXV96FP6
For 1.58 mm FP or FP6, solid, slot or hydrophobic pins

AFIXV384FP6
For 1.58 mm FP or FP6, solid, slot or hydrophobic pins

 
 
         
 
Click here for a list of published articles that cite using the products on this page.
 
         

About | Ordering | Returns
Copyright 2010, V&P Scientific, Inc. All rights reserved.